Advantech AIMB-766 Uživatelský manuál stáhnout pdf (Strana 23)

15 ACP-1010 User Manual

Chapter 3 Operation

3.1.2 LED indicators

Six LEDs are placed in the middle of the front panel to indicate system health and

activity. Please refer to Table 3.1 for the LED definition summary.

When the system power is on, the power LED stays GREEN.

When the fan LED is RED, it indicates a cooling fan problem; the audible alarm is

also activated. To stop the alarm beep, press the Alarm Reset button and replace

the failed fan with a good one immediately.

If the temperature LED is RED, it means that the inside of the chassis has over-

heated (more than 50° C). An audible alarm will be activated. To stop the alarm beep,

press the Alarm Reset button. Inspect the fan filter and the rear section of the chas-

sis immediately. Make sure the airflow inside the chassis is smooth and not blocked

by dust or other particles.

When data is transmitting, the HDD LED blinks ORANGE.

If the LAN1/LAN2 LED stays GREEN, it means the network connection is working

normally. When data is transmitting through the network, the LAN LED blinks. If the

LAN1/LAN2 LED fails to light up, inspect the LAN cable and the connections.

Table 3.1: LED indicator functions

LED Description Green Red Orange

Power

System power Normal N/A N/A

Fan

Cooling fan status Normal Abnormal N/A

Temperature

Temperature in the chassis Normal Abnormal N/A

Hard Disk

Hard disk drive activity N/A No light Normal

LAN LAN1 & LAN2 status Normal

No light N/A

Data transmit through LAN Blinking

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 41 42

Žádné komentáře

Advantech AIMB-766 Uživatelský manuál Strana 23