Advantech IPC-6806S Uživatelský manuál stáhnout pdf (Strana 23)

13 Chapter 2

2.3.2 Floppy disk drive

1. Remove the blanking covers of the 3.5" drive bay.

2. Referring to Figure 2-3, insert a FDD into the drive bay with the

base facing inward. Fix the drive with screws.

3. Connect 34-pin flat cable from the CPU card to the FDD.

4. Plug a floppy drive power connector into the FDD.

2.4 Installing add-in cards

IPC-6806S can accept up to six half-sized cards (including a CPU card)

via the supported passive backplane. To install an add-in card, refer to

Figure 2-4 and proceed as follows:

Figure 2.4: Installing an add-in card

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 39 40

Žádné komentáře

Advantech IPC-6806S Uživatelský manuál Strana 23