Data Acquisition Boards
Features
PCIE-1760
Specifications
Isolated Digital Input
Channels 8
Input Voltage Logic 0: 1.0 V max.
Logic 1: 4.5 V min. (12 V max.)
Interrupt Capable Ch. 8
Isolation Protection 2,500 V
DC
Opto-Isolator Response 25 µs
Input Resistance 2 k: 1/4 W
Counter/Timer
Channels 8
Resolution 16 bits
Compatibility 5 V/TTL
Max. Input Frequency 500 Hz
Isolation Protection 2,500 V
DC
PWM Channels 2
Digital Noise Filter Min. effective high input period t [(2 ~ 65535) x 5 ms]
+ 5 ms
Min. effective low input period t [(2 ~ 65535) x 5 ms]
+ 5 ms
Relay Output
Channels 8
Relay Type 2 x Form C, and 6 x Form A
Contact Rating 1 A @ 125 V
AC
, 2 A @ 30 V
DC
Max. Switching Power 125 VA, 60 W
Max. Switching Voltage 250 V
AC
, 220 V
DC
Max. Switching Current 2 A
Operate/Release Time 5 / 3.5 ms max
Resistance Contact: 50 m: max.
Insulation: 100 M: min. @ 500 V
DC
Life Expectancy 3 x 10
5
cycles min.: 2 A @ 30 V
DC
, 1 A @ 125 V
AC
(Electrical) 10
6
cycles min.: 1 A @ 30 V
DC
, 0.5 A @ 125 V
AC
8 opto-isolated digital input channels with counter/timer function
8 relay actuator output channels
2 opto-isolated PWM outputs
LED indicators to show activated relays
Jumper selectable dry contact/wet contact input signals
Up event counters for DI
Programmable digital filter function for DI
Pattern match interrupt function for DI
"Change of state" interrupt function for DI
BoardID switch
8-ch Relay and 8-ch Isolated Digital
Input PCI Express Card
General
Bus Type PCI Express V1.0
I/O Connectors 1 x DB37 female connector
Dimensions (L x H) 168 x 100 mm (6.6" x 3.9")
Power Consumption Typical: 5 V @ 450 mA
Max.: 5 V @ 850 mA
Operating Temperature 0 ~ 60°C (32 ~ 140°F)
Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
Storage Humidity 5 ~ 95 % RH, non-condensing
Ordering Information
PCIE-1760 8-ch Relay/IDI PCIe Card w/ 10-ch Counter/Timer
Accessories
PCL-10137-1E DB37 Cable, 1 m
PCL-10137-2E DB37 Cable, 2 m
PCL-10137-3E DB37 Cable, 3 m
ADAM-3937 DB37 DIN-rail Wiring Board
Introduction
PCIE-1760 relay actuator and isolated digital input card is a PC add-on card for the PCI Express bus. It meets the PCI Express standard Rev. 1.0. It provides 8 opto-isolated digital
inputs with isolation protection of 2,500 V
DC
for collecting digital inputs in noisy environments, 8 relay actuators that can be used as a on/off control devices or small power switches,
and 2 isolated PWM (Pulse Width Modulation) outputs for custom applications.
For easy monitoring, each relay is equipped with one red LED to show its on/off status. Each isolated input supports both dry contact and wet contact so that it can easily interface
with other devices when no voltage is present in the external circuit.
19-20
Komentáře k této Příručce