Advantech I/O Module 5000 Series Uživatelský manuál stáhnout pdf (Strana 22)

APAX-5000 I/O Series User Manual 16

6. Lock the upper case of APAX-5343E to its backplane by pulling down the mod-

ule locks on the upper case. Connect AC power code to the power connectors

on the upper case of APAX-5343E. Then the whole system is powered-on.

1.8 Decommission and Disposal

APAX-5000 I/O modules support hot-swap functionality. It means the I/O module can

be removed from the backplane or inserted on the backplane when the complete sys-

tem is power-on. This can significantly help to make it more convenient for system

maintenance. Changing one module won't affect operation of other modules. The

hot-swap functionality is implemented by the module locks. Refer to figure below for

how to dismantle APAX-5000 I/O modules:

1. Pull up the two module locks on side of APAX-5000 I/O modules first. This

action disconnects the power between the I/O module and backplane.

Note! If you only want to remove one module , the procedure is similar. (Pull

up the module locks and then remove the module without shutting down

the power)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 65 66

Žádné komentáře

Advantech I/O Module 5000 Series Uživatelský manuál Strana 22