Advantech RS-485 Uživatelský manuál stáhnout pdf (Strana 194)

100

101

6-72 ADAM-5000

Command Set

$aaSiCjAhs $aaSiCjAhs

Name Set Alarm Mode

Description Sets the High/Low alarm of the specified input channel

in the addressed ADAM-5000 system to either Latching

or Momentary mode.

Syntax $aaSiCjAhs(cr)

$ is a delimiter character.

aa (range 00-FF) represents the 2-character hexadecimal

address of anADAM-5000 system.

SiCj identifies the desired slot i (i : 0 to 3) and the

desired channel j (j : 0 to 7).

Ahs is the Set Alarm Mode command.

h indicates alarm type and can have the value H = High

alarm, L = Low alarm

s indicates alarm mode and can have the value M =

Momentary mode, L = Latching mode

(cr) represents terminating character, carriage return

(0Dh)

Response !aa(cr) if the command was valid

There is no response if the system detects a syntax error

or communication error or if the specified address does

not exist.

! delimiter character indicating a valid command was

received.

aa represents the 2-character hexadecimal address of the

corresponding ADAM-5000 system.

(cr) represents terminating character, carriage return

(0Dh)

5013/5017/5017H/5018

Analog Input Alarm

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 347 348

Komentáře k této Příručce

Žádné komentáře

Advantech RS-485 Uživatelský manuál Strana 194

Komentáře k této Příručce

Související produkty a manuály pro Digitální a analogové I / O moduly Advantech RS-485