Advantech 5000 Series Uživatelský manuál stáhnout pdf (Strana 141)

Command Set

Analog Input Alarm

5013/5017/5017H/5017UH/5018/5018P

$aaSiCjAhEs

Name Enable/Disable Alarm

Description Enables/Disables the High/Low alarm of the

specified input channel in the addressed

ADAM-5000 system

Syntax $aaSiCjAhEs(cr)

$ is a delimiter character.

aa (range 00-FF) represents the 2-character hexadecimal

address of an ADAM-5000 system.

SiCj identifies the desired slot i (i : 0 to 3) and the

desired channel j (j : 0 to 7).

AhEs is the Set Alarm Mode command.

h indicates alarm type and can have the value H = High

alarm, L = Low alarm

s indicates alarm enable/disable and can have the value

E = Enable, D = Disable

(cr) represents terminating character, carriage return

(0Dh)

Response !aa(cr) if the command was valid

There is no response if the system detects a syntax error

or communication error or if the specified address does

not exist.

! delimiter character indicating a valid command was

received.

aa represents the 2-character hexadecimal address of the

corresponding ADAM-5000 system.

(cr) represents terminating character, carriage return

(0Dh)

6-76 ADAM-5000

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 300 301

Žádné komentáře

Advantech 5000 Series Uživatelský manuál Strana 141