Advantech Data Acquisition Modules ADAM 4000 Uživatelský manuál stáhnout pdf (Strana 290)

100

101

Chapter 7

ADAM 4000 Series User’s Manual

$AA0L

Name Read Minimum Input Signal Width at Low Level command

Description Read the minimum input signal width at low level for a

specified counter/frequency module to filter noise.

Syntax $AA0L(cr)

$ is a delimiter character.

AA (range 00-FF) represents the 2-character hexadecimal

address that you will access to.

0L is the Read Minimum Input Signal Width at Low Level

command.

(cr) is the terminating character, carriage return (0Dh).

Response !AA(data)(cr) if the command is valid.

?AA(cr) if an invalid operation was entered.

There is no response if the module detects a syntax or

communication error, or even if the specified address does

not exist.

! is a delimiter character which indicates a valid command.

? is a delimiter character which indicates an invalid

command.

AA (range 00-FF) represents the 2-character hexadecimal

address of the module.

(data) is the minimum width at low level. The unit is in

μsec (microsecond) and its resolution is 1 μsec. The format

is a five digit integer that ranges from 2 μsec to 65535 μsec.

(cr) is the terminating character, carriage return (0Dh).

Example command: $050L(cr)

response: !0500084(cr)

The command requests the counter/frequency module at

address 05 to read its minimum input signal width at low

level. The module replies that its minimum input signal

width at low level is 84 μsec.

4080, 4080D

1 2 ... 285 286 287 288 289 290 291 292 293 294 295 ... 428 429

Komentáře k této Příručce

Žádné komentáře

Advantech Data Acquisition Modules ADAM 4000 Uživatelský manuál Strana 290

Komentáře k této Příručce

Související produkty a manuály pro Hardware Advantech Data Acquisition Modules ADAM 4000